Skip to content
💲 OFFRE REVENDEURS : 50€ offerts sur votre 1ère commande
⭐️ 4,7/5 sur Trustpilot | 400+ avis
💲 OFFRE REVENDEURS : 50€ offerts sur votre 1ère commande
⭐️ 4,7/5 sur Trustpilot | 400+ avis
💲 OFFRE REVENDEURS : 50€ offerts sur votre 1ère commande
⭐️ 4,7/5 sur Trustpilot | 400+ avis
💲 OFFRE REVENDEURS : 50€ offerts sur votre 1ère commande
⭐️ 4,7/5 sur Trustpilot | 400+ avis
💲 OFFRE REVENDEURS : 50€ offerts sur votre 1ère commande
⭐️ 4,7/5 sur Trustpilot | 400+ avis
💲 OFFRE REVENDEURS : 50€ offerts sur votre 1ère commande
⭐️ 4,7/5 sur Trustpilot | 400+ avis
logo PrintMyDTFlogo PrintMyDTF
0

How to press DTF transfers ?

Conditions de pose UV DTF Objet
Lire
Photo qui montre l'utilisation d'une raclette en feutre pour l'UV DTF
Conditions de pose DTF GOLD
Lire

Application table

Material Transfer Temperature Transfer Duration Transfer Pressure Coat Second Pressing
Cotton 145°C 12-15 sec 3.5-5 Bars Hot 5 sec under the same conditions
Polyester 120-140°C 12-15 sec 3.5-5 Bars Hot 5 sec under the same conditions
Cotton/Polyester Mix 145°C 12-15 sec 3.5-5 Bars Hot 5 sec under the same conditions
Synthetic Fibers To be tested on product 12-15 sec 3.5-5 Bars Cold 5 sec under the same conditions
Lycra/Spandex To be tested on product 10 sec minimum 3.5 Bars Cold 5 sec under the same conditions
Velvet To be tested on product 10 sec minimum 3.5 Bars Cold 5 sec under the same conditions
Wood To be tested on product 10 sec minimum 3.5 Bars Cold 5 sec under the same conditions

Tutoriel vidéo

How to apply a DTF transfer?

How to apply a DTF transfer?

Following the specifications in the application table.
Optional: you can make an initial press to achieve a smooth and clean surface.
Position the DTF transfer in the desired location. Optional: use heat-resistant tape to secure your transfer in place and place a Teflon sheet over the transfer to protect the press.
Following the specifications in the application table.
Depending on your garment, it may be wise to wait a bit for the transfer to cool down.
For better adhesion and maximum durability, press a second time for 5 seconds with a Teflon sheet as protection between the print and the press.

Our best advices