Skip to content
💲 50€ free on your 1st order - code : WELCOME50
🔥 PrintMyDTF : 100% deadlines met | Quality printing | Quality customer service
⭐️ 4.7/5 on Trustpilot | 250+ reviews
💲 50€ free on your 1st order - code : WELCOME50
🔥 PrintMyDTF : 100% deadlines met | Quality printing | Quality customer service
💲 50€ free on your 1st order - code : WELCOME50
🔥 PrintMyDTF : 100% deadlines met | Quality printing | Quality customer service
⭐️ 4.7/5 on Trustpilot | 250+ reviews
💲 50€ free on your 1st order - code : WELCOME50
🔥 PrintMyDTF : 100% deadlines met | Quality printing | Quality customer service
💲 50€ free on your 1st order - code : WELCOME50
🔥 PrintMyDTF : 100% deadlines met | Quality printing | Quality customer service
⭐️ 4.7/5 on Trustpilot | 250+ reviews
💲 50€ free on your 1st order - code : WELCOME50
🔥 PrintMyDTF : 100% deadlines met | Quality printing | Quality customer service
logo PrintMyDTFlogo PrintMyDTF

DTF GOLD transfer installation conditions

UV DTF installation conditions Object
Read
Photo qui montre l'utilisation d'une raclette en feutre pour l'UV DTF
DTF CMYK application conditions
Read

Table deposit

Material Transfer temperature Transfer duration Transfer pressure Coat
Cotton 130°C 10-15 sec 3.5-5 Bars Cold
Polyester 130°C 10-15 sec 3.5-5 Bars Cold
Cotton/polyester mix 130°C 10-15 sec 3.5-5 Bars Cold
Synthetic fibers To be tested on product 10 seconds minimum 3.5-5 Bars Cold
Lycra/Spandex To be tested on product 10 seconds minimum 3.5 Bars Cold
Velvet To be tested on product 10 seconds minimum 3.5 Bars Cold
Drink To be tested on product 10 seconds minimum 3.5 Bars Cold

Video tutorial , how to apply a GOLD transfer

Materials compatible

Materials that are suitable for regular dtf transfer are also suitable for dtf gold transfer, except that the latter is less flexible. Thus, on very stretchy fabrics like spandex, although the markings adhere, they can crack in the event of strong extension.

DTF Textile compatible materials

How to apply a DTF GOLD transfer?

Following the characteristics of the installation table.
Your support must be very smooth, for example you can make a first press stroke before marking.
Position the DTF GOLD transfer in the desired location. Optional: add thermal tape to hold your transfer in place and place a Teflon sheet over the transfer to protect the press.
Following the instructions in the installation table.
To remove small film residues that remain after the first pressing. WARNING: if your adhesive roll sticks too much it risks tearing your transfer.
For 5 seconds with a Teflon sheet as protection between the marking and the press.

Our advice not to be missed